At Dash Fasteners, we connect our customers with access to a robust inventory of NSN parts, including Bearing Ball Rod End components like part number REP-3-M-6-2-N-1. This particular item has the NSN 3110007666924 and is manufactured by Mcwilliams Forge Company, a trusted entity on our Approved Vendor List (AVL). If you are interested in this product, or any other of our items listed, we encourage you to fill out the provided Request for Quote (RFQ) form for the means of requesting quotes for your comparisons. Simply provide us with details about your procurement needs like desired quantities, target prices, and expected shipping time frames, and expect to receive a competitive quote in less than 15 minutes. Using the information, you provide in your form, one of our dedicated representatives can formulate a solution that is tailored to your specific requirements.
Note : We Will Not Share Your Information To Any Third Parties.
At Dash Fasteners, we are dedicated to the reliable quality of our NSN parts, choosing to only source our 3110 Bearings Antifriction Unmounted items and other offerings from top manufacturers like Mcwilliams Forge Company. In addition, our products are subjected to strict evaluation to guarantee that all available items are airworthy and of high quality. If you have any questions about our offerings, call or email us at your convenience, and we will be more than happy to assist you however we can. Begin the process today for purchasing NSN 3110-00-766-6924 with the CAGE Code 39443, and see how we can serve as your strategic sourcing partner for all your operational needs!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-766-6924 Item PartTypeName: BEARING,BALL,ROD END | 3110 | 007666924 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| AN946RE3M6-2N | 6 | 1 | C | A |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AGGY | SHANK THREAD LENGTH | 0.7190 INCHES MINIMUM AND 0.7810 INCHES MAXIMUM |
| AGYW | BEARING SEAL TYPE | CONTACT |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| CTLK | SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | THIS ITEM HAS BEEN DETERMINED TO BE A CRITICAL APPLICATION ITEM. IN-FLIGHT FAILURE OF THIS ITEM WOULD CREATE A HAZARDOUS CONDITION |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | STEEL COMP E52100 INNER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OUTER RING |
| SFTT | SURFACE TREATMENT | CADMIUM OUTER RING |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AAZE | SHANK DIAMETER | 0.3750 INCHES NOMINAL |
| AAZF | SHANK STYLE | EXTERNALLY THREADED |
| ABHP | OVERALL LENGTH | 1.7505 INCHES MINIMUM AND 1.7805 INCHES MAXIMUM |
| ABXV | BORE DIAMETER | 0.1897 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 0.7710 INCHES MINIMUM AND 0.7910 INCHES MAXIMUM |
| AGVT | OUTER RING WIDTH | 0.3180 INCHES MINIMUM AND 0.3380 INCHES MAXIMUM |
| AGVU | INNER RING WIDTH | 0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | 1.3650 INCHES MINIMUM AND 1.3850 INCHES MAXIMUM |
| AGYJ | SEAL QUANTITY | 2 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| CQJX | NOMINAL THREAD SIZE | 0.375 INCHES |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE SEAL |
| MATT | MATERIAL | STEEL COMP 4130 OUTER RING |
| MATT | MATERIAL | STEEL COMP 4130 SHAFT |
| MATT | MATERIAL | STEEL COMP E52100 BALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 3652 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 3666 ASSN STD SINGLE MATERIAL RESPONSE SEAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE SHAFT |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE BALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RING |
| SFTT | SURFACE TREATMENT | CADMIUM ROD END BODY |
| STYL | STYLE DESIGNATOR | DOUBLE ROW,STAGGERED,BALL |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote